This position supports the Operations, Planning, and Production Control teams to achieve the production schedule by tracking work orders, identifying issues/solutions, and escalating as needed.Duties/Responsibilities: Utilize Production Analysis, Daily Movement Reports, and Work Order Estimated Completion Report to monitor execution of work orders. Track on time delivery to manufacturing plan. Track and ensure “On Hold” and “Aging” work orders are resolved quickly. Escalate if cannot be resolved in a timely manner. Coordinate with management in resolving planning and production control issues using appropriate protocol (team lead, production manager, etc.). Work with cross-functional teams to complete job orders on time and within customer specifications. Track and communicate production updates daily to key stakeholders. Update MRP system work orders that go on hold for >1 day so that automated daily hold reports can be generated. This position may require overtime for coverage on alternate shifts and weekends. Will be required to perform other duties as requested, directed or assigned.Requirements: Three to five years related experience in supply chain/production planning in a manufacturing environment and/or training; or equivalent combination of education and experience. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly motivated and well organized. Excellent interpersonal skills and the ability to influence others in a fast-paced work environment. Ability to work standing for long periods. Excellent communication skills, both one to one and in a group setting Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship.Position requires candidate to be a U.S. person as defined in ITAR,

SECOND SHIFT - Monday through Friday - 3:00pm-11:30pmThis position is primarily responsible for the routine maintenance, repair and installation of complex printed circuit board manufacturing equipment, with additional expectations of flexibility to support some facility needs as situations may arise/dictate.Duties/Responsibilities: Routine/Emergency maintenance of HVAC, Boilers, Chillers, Fume Scrubbers, and Compressor Systems that support the facility. Utilization of a Building Management System (BMS) to maintain various facility area environmental needs and use of the system to diagnosis/adjust as needed when issues arise. Maintaining the chemistries required to efficiently operate Boiler and Chiller systems. Ensuring the State of NH and OSHA required specifications of chemical fume ventilation is maintained in accordance with all specifications. Ensuring that annual required State of NH inspections of Boilers are completed as required. Test pipe or tubing joints or connections for leaks, using pressure gauge or soap-and-water solution. Repair or replace defective equipment, components, or wiring. Reassemble and test equipment following repairs. Install, connect, and adjust thermostats, humidistats, various controllers, etc. inspect and test systems to verify system operation/specifications to detect and locate potential malfunctions as part of the routine preventative maintenance schedule. Diagnose systems & troubleshoot emergency equipment issues in a timely and efficient manner. A working knowledge of all aspects of AC power (3 phase to single phase) and DC power, electronics, computers,as pertains to equipment in a manufacturing environment that includes complex systems that integrate all these functions to allow the equipment to operate. Experience with Hitachi Drill and Orbotech Automated Optical Inspection equipment a plus, but not required. Read & interpret operation/maintenance manuals, as well as other technical documents (i.e.blueprints/electr

SECOND SHIFT - Monday through Friday - 3:00pm-11:30pmThis position is primarily responsible for the routine maintenance, repair and installation of complex printed circuit board manufacturing equipment, with additional expectations of flexibility to support some facility needs as situations may arise/dictate.Duties/Responsibilities: Routine/Emergency maintenance of HVAC, Boilers, Chillers, Fume Scrubbers, and Compressor Systems that support the facility. Utilization of a Building Management System (BMS) to maintain various facility area environmental needs and use of the system to diagnosis/adjust as needed when issues arise. Maintaining the chemistries required to efficiently operate Boiler and Chiller systems. Ensuring the State of NH and OSHA required specifications of chemical fume ventilation is maintained in accordance with all specifications. Ensuring that annual required State of NH inspections of Boilers are completed as required. Test pipe or tubing joints or connections for leaks, using pressure gauge or soap-and-water solution. Repair or replace defective equipment, components, or wiring. Reassemble and test equipment following repairs. Install, connect, and adjust thermostats, humidistats, various controllers, etc. inspect and test systems to verify system operation/specifications to detect and locate potential malfunctions as part of the routine preventative maintenance schedule. Diagnose systems & troubleshoot emergency equipment issues in a timely and efficient manner. A working knowledge of all aspects of AC power (3 phase to single phase) and DC power, electronics, computers,as pertains to equipment in a manufacturing environment that includes complex systems that integrate all these functions to allow the equipment to operate. Experience with Hitachi Drill and Orbotech Automated Optical Inspection equipment a plus, but not required. Read & interpret operation/maintenance manuals, as well as other technical documents (i.e.blueprints/electr

SECOND SHIFTThis position is responsible for maintaining the production flow through the processes in the Image Department.Duties/Responsibilities: Follow all short sheets, standard operating procedures and Amphenol’s company safety regulations. Perform/document weekly process audits and preventive maintenance. Monitor/audit records, logbook entries and documentation to ensure thorough and accurate completion using Excel. Coordinate activities of multiple tasks to ensure timely and efficient product movement. Responsible for reviewing process change documents, training and certifying new operators including maintaining dept. training matrix. Work with process engineering group to assist in the identification of new or current processes, working to improve efficiencies and/or cost down opportunities. Take a lead role in identifying any quality issues with resolution to work towards ensuring that activities are driven to address these non-conformances and proper notification is made to management as required. Responsible for machine maintenance: Ensure Preventative Maintenance is performed regularly, contact the appropriate personnel when equipment is down. Notify management of any deficiencies in product workflow, with communication for priorities between departments and group leaders. Assists in planning overtime staffing of the department to support output requirements. Attends department meetings, tie-offs, ensuring smooth transition from one shift to the next. Assist in managing department goals for safety, training, productivity and growth of employee’s. Drive improvement work as needed using improvement tools i.e. Lean Six Sigma, TQM, etc. Perform and/or learn all the operations associated with the Image dept., including: Expose, LDI Expose, Chem Clean, Coat, Develop, Manual Clean, Artwork Inspection and Catching. May be required to cross train in other departments. This position may require overtime for coverage on alternate shifts and weekends.

This position is responsible for the operation of various technical machinery including SMT equipment, jet solder equipment, selective solder equipment, and/or selective coating equipment.Duties/Responsibilities: Operate and perform simple troubleshooting on the SMT equipment, the selective solder equipment or the selective coating equipment.  Use assembly specific documentation, including routes, bills of material, and prints to correctly process multiple types of backplanes. Carefully follow all machine process documentation and machine safety rules.  Perform in-process inspections with a clear understanding of acceptance and rejection criteria. Work positively with others in the work cell. Actively participate in continuous improvement work. Comply with department specific safety rules and general Amphenol policies. This position may require overtime for coverage on alternate shifts and weekends.     May be required to cross train in other departments.             Will be required to perform other duties as requested, directed or assigned.Requirements: High school diploma or general education degree (GED); 1+ years' experience operating backplane processing equipment. 1+ years' experience in backplane and/or connector assembly. Ability to read and follow all short sheets/customer documents. Ability to work standing for extended periods of time and able to lift up to 25 lbs. safely.       Independent self-starter, who can work with limited supervision. Ability/flexibility to work in a fast-paced environment. Must have excellent interpersonal, communication, team-building and organization skills. Basic computer experience a plus - Microsoft Office-Outlook/Word/Excel.              Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defin

**Sign-on Bonus - $5,000.00 **We are looking for an experienced and dedicated Process Engineer to work collaboratively with the production and quality departments within a dynamic and engaging environment to optimize production processes and develop new processes in our PCB operations.This position is responsible for providing technical leadership and support within a specific manufacturing department (s).  Responsible for creating and maintaining process documentation. Measure/Monitor process yields and capabilities. Identify/implement projects to reduce scrap or rework, reduce process cost, or to improve process capability to meet future customer or business needs.Duties/Responsibilities: Process Owner for multiple processes within a department. Create and maintain accurate process documentation for those processes. Measure process performance and take action if process is not meeting goals or specific product requirements. Create/Maintain design guidelines pertinent to technical areas of responsibility. Process expert in area of responsibility. General process knowledge of all processes within Printed Circuit Board Manufacturing. Investigate Scrap/rework events, and then identify and implement effective corrective actions to prevent recurrence. Lead problem solving teams as needed. Use advanced problem-solving skills such as Failure Mode Effect Analysis (FMEA) or Design of Experiment (DOE) as needed to solve complex problems. Develop/Implement Capital Improvement projects that improve capability and/or reduce cost. Provide training and guidance to operators or technicians. Communicate status of key projects or assignments to all levels of the organization. Contributes to the continuous improvement of the department and division. Will be required to perform other duties as requested, directed or assigned.Requirements: A Bachelors' degree in related engineering discipline, 4-6 years' experience is a plus.  Working knowledge of printed circuit board manufacturing w

This position is responsible for supporting the planning and scheduling processes, from customer order confirmation through fulfillment. The production control team accomplishes this applying MRP specific actions, order scheduling, production milestones tracking, capacity planning, and working with critical functions in the organization to remove obstacles.Duties/Responsibilities: Monitors, tracks, reports, advises, and conducts production-planning processes in order to ensure the organization meets customer delivery requirements and expectations. Supports sales activities, new product introduction, and other demand fulfillment activities. Maintains ERP/MRP system parameters and processes, generates and releases work orders, reschedules by order action reports, maintains area capacity plans and/or provides production forecasts. Creates, prioritizes and expedites production orders in the ERP system to meet planned shipment commitments. Communicates with cross-functional team members regarding production needs and escalations. Develops and maintains effective relationships with internal and/or external customers in all areas relating to availability of product and resources, sales order changes, work order entry and scheduling, committed delivery dates, customer related reschedules, and capacity planning. Reviews and maintains sales orders and production orders scheduled backlog to ensure material availability for customer delivery commitments and any recovery plans for on-time delivery risks. This position may require overtime for coverage on alternate shifts and weekends. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor's degree from four-year college or university or three to five years related experience in supply chain/production planning in a manufacturing environment and/or training; or equivalent combination of education and experience. Strong computer skills to include Outlook, Excel and Word. Ability to

This position is responsible to lead and supervise the Production Control Group, including running MRP daily; prioritization of shop-floor work-orders; expediting, communicating and resolving obstacles to work order execution. Your team will be working in the office and on the manufacturing floor. You will work cross-functionally, interfacing with engineering, planning, and production to meet production goals.Duties/Responsibilities: Maintain a strong, motivated production control team capable of consistently managing MRP runs and work order integrity. Ensure efficient, timely work order scheduling and prioritization to ensure production teams can meet production targets. Empower the production control team to collaborate with production teams and other stakeholders to improve processes to ensure efficient WIP movement. Ensure adherence to all production control processes and make sure that all team members are trained and cross-trained. Report generation and status updates to internal customers. Actively participate in process improvement initiatives to ensure best practices across production control. Will be required to perform other duties as requested, directed or assigned.Requirements: Bachelor’s Degree or a combination of work experience and education preferred. Three to five years related experience in supply chain/production planning in a manufacturing environment. Three to five years of supervisory experience Ability to read, write and communicate to the degree necessary to perform the job. Able to handle situations involving sensitive issues with professionalism. Strong computer skills to include Outlook, Excel and Word. Ability to work cross functionally with many levels of an organization. Must be able to work independently, as well as under direction, must be highly energized, motivated and well organized. Prior experience with an MRP/ERP system preferred. Excellent interpersonal skills and the ability to influence others in a fast-paced work env

The Quality Engineer I position is responsible for helping plan, coordinate, and implement process controls designed to ensure quality control and quality assurance through all levels of the organization. Provides direct assessments of operations and opportunities for performance improvements through internal quality assessments. Helps to resolve quality issues, taking appropriate corrective actions, when necessary, by implementing performance improvements, through integration of policies and systems.Duties/Responsibilities: Working directly with customer drawings, PO's, specifications, quality systems flow downs, (e.g., pack and ship sheets), supplier quality requirements (SQR's), and customer websites or portals. Supports the preparation and review of quality documentation and deliverables for fulfilling technical requirements for final product delivery. Maintains communications with Engineering, Manufacturing, Purchasing, Finance, Quoting, Customers and Suppliers on quality related issues. Communication and interpersonal skills required to Interface with personnel at various technical and managerial levels, helping to identify quality issues and collaboratively pursue solutions. Recommend, develop, implement and maintain quality assurance systems, methods and procedures. Review engineering documentation, process specifications, manufacturing methods, contractual requirements and testing procedures to identify compliance with QA requirements. Use root cause analysis tools and techniques, issue appropriate documentation, coordinate corrective action, and follow-up to assure effective solutions of problems. Creates a teamwork environment while working with cognizant personnel to identify and implement corrective actions. Develop process improvement efforts using a data driven approach, (e.g., apply SPC, statistical process control) methods for analyzing data to evaluate current state and/or the need for changes. Using these analytical techniques to develop and impl

This position is responsible for review of documentation, specifications and certifications with attention to detail.  Communicating internally and with external suppliers with non-conforming product or documentation.  Generating appropriate internal documentation, records and reports as needed.Duties/Responsibilities: Review and acceptance of Supplier First Article Inspections in accordance with AS9102. Working directly with suppliers to correct documentation errors in a timely manner. Review of all supplier related documentation. Maintaining a database/log of supplier corrections. Scanning of finalized Supplier documents. This position may require overtime for coverage.         May be required to cross train in other departments. Will be required to perform other duties as requested, directed or assigned. Assisting in other Quality Assurance related activities.Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. High school diploma or general education degree (GED); or six months to one-year related Quality experience and/or training; or equivalent combination of education and experience. Ability to work alone with minimal supervision. Good communication internal and externally via phone and by email. Attention to detail when reviewing documents. Ability to read and understand specification requirements. Basic Computer experience - Microsoft Office-Outlook/Word/Excel. Ability to research required requirements and/or specifications.Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20).Amphenol is a proud Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race

This position is responsible for processing assembly RMA’s (Return Material Authorizations) and RVA’s (Return Value Adds) and Administering the Site Calibration Program.Duties/Responsibilities: Process RMA’s and RVA’s through Paradigm floor control system Review customer complaints and verify accuracy of reported failure Inspect RMA’s/RVA’s prior to processing Coordinate with Process Engineering to define rework routing Run reports in Unipoint Software to identify equipment requiring calibration Develop/execute monthly plan to have required calibrations performed Submit purchase requisitions and coordinate with external calibration services Update Unipoint database when calibrations are complete This position may require overtime for coverage on alternate shifts and weekends. Follows established safety procedures. Will be required to perform other duties as requested, directed or assigned.Requirements: One year certificate from college or technical school; or three years related Quality inspection experience. Must be able to use a computer to maintain records, develop reports, and analyze data and document discrepancies as well as using a computer to perform all other related aspects of the position. Certification training in IPC 610 for electronic assemblies is preferred. Prior experience with equipment calibration systems is preferred.Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship.Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20).Amphenol is a proud Equal Opportunity/Affirmative Action Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.For